Flexible paint specially formulated for painting vehicle bumpers. It has a satin textured appearance that imitates the original finishes.
It can be used as an anchorage primer for plastics.
Recoating is possible with 2K single-coat and waterborne bi-coat systems.
A wide variety of textures can be achieved by modifying the application conditions.
Shake well before use.
Drain the sponge well and with the soft part, apply the dye evenly on the surface to be treated.
For repainting, sanding, degreasing and pre-drying.
Surfaces must be totally clean. Moisten the sponge with water and clean the surface to be restored with the rough part.
Used for restoring old and damaged surfaces giving them a totally renewed look.
The appearance after repair is semi-gloss.
The dye is sensitive to moisture.
The use of appropriate personal protective equipment is recommended during application, to prevent the irritation of the respiratory tract, skin and eyes. For professional use only.
Keep in a tightly covered container, in a dry and ventilated place, avoiding direct exposure to sunlight. Temperature above 5 °C is recommended, between 15 and 30 °C optimal.
The VOC content of URKIPT is a maximum of 840 g/l in compliance with European regulation 2004/42/EC IIB(E) (840) <840 g/l.
The information contained in this Technical Specification Sheet is based on the knowledge and experience of the BESA technical department, and with it it’s intended to advice and inform, being the responsibility of the user to take the necessary measures to guarantee the intended purpose of the product. FOR PROFESSIONAL USE ONLY.