Contact us if you have any question or you can't find the system you were looking for.
B-50 ACRYLIC PUR- R-1 SYSTEM
General Information
2K SYSTEM
| Support type | Surface pretreatment |
|---|---|
| Steel | Degreased |
| Aluminum | Brushed |
| Galvanized | |
| Iron |
Sectors
¿Quieres obtener más información?
ENVIAR CONSULTADESCRIPTION
System designed for painting railway vehicules, compliant with the norm EN 45545 to protect passengers and staff from fire.
BESA-CAR for wet on wet application in several coats in high quality avoiding the sinkages of the topcoat. Easy to sand.
URKI-NATO offers excellent properties in hardness, elasticity, resistance to abrasive agents, such as soap, fuel, grease, oil, chemical products, etc. As a topcoat it can be used UURKI-NATO, URKI-NATO Sat and with textured effect or as antigraffiti.
RESISTANCE AND CERTIFICATES
Risks levels HL1, HL2 & HL3 have been achieved according to Norm UN EN 45546 following the requirements from Norm R1, R2, R3, R7 & R17.
PRODUCTS
BESA-CAR
2K HS Filler
| Physical properties | |
|---|---|
| Type of product | Acrylic-PUR |
| Density 20 °C | 1,59 ± 0,05 |
| Supply viscosity at 20 °C | 100 - 105 KU (Stormer) |
| Solid Content (% weight) | 65-69% (mixed with hardener) |
| Solid Content (% volume) | 43-47% (mixed with hardener) |
| V.O.C. | 492 g/l (ready to use) |
| Color | 7035 Grey, 7016 Grey, 7040 Grey |
| Features of dry film | |
|---|---|
| Theoretical yield | 9-10 m² / l (50 my) |
| Gloss 60 - 60° | Matt-Satin |
| Recoatability | 2-3h. |
URKI-NATO
2K Polyurethane Enamel
| Physical properties | |
|---|---|
| Type of product | Polyester Polyurethane |
| Density 20 °C | 1,05 - 1,30 |
| Supply viscosity at 20 °C | 80 - 90 KU (Stormer) |
| Solid Content (% weight) | 55 - 64% (mixed with hardener) |
| Solid Content (% volume) | 48 - 51% (mixed with hardener) |
| V.O.C. | 540 g/l (ready to use) |
| Color | s/m URKI-SYSTEM |
| Features of dry film | |
|---|---|
| Theoretical yield | 12-13 m² / l (40 my) |
| Gloss 60 - 60° | > 95% |
| Recoatability | 18 h (after this time degrease). To use it as antigraffiti it needs to be sanded and degreased. |
URKI-NATO SAT
2K Satin Polyurethane Enamel
| Physical properties | |
|---|---|
| Type of product | Polyester Polyurethane |
| Density 20 °C | 1,10 ± 1,35 |
| Supply viscosity at 20 °C | 100 - 120 sec. Ford n.° 4 |
| Solid Content (% weight) | 55 - 64% (mixed with hardener) |
| Solid Content (% volume) | 44 - 48% (mixed with hardener) |
| V.O.C. | 546 g/l (ready to use) |
| Color | s/m URKI-SYSTEM |
| Features of dry film | |
|---|---|
| Theoretical yield | 11 - 12 m² / l (40 my |
| Gloss 60 - 60° | 20-30% (E-225) |
| Recoatability | 12 h. To use it as antigraffiti it needs to be sanded and degreased. |
IMPLEMENTATION PROCESS
SURFACE PREPARATION
CAST IRON STEEL
The surfaces should be degreased and free of dust.
APPLICATION
BESA-CAR
E-224 medium E-202 fast 
2h. E-224 1h. E-202 
70-80" 
URKISOL 8229 10% Ø 1,8-2.0 mm. 
100-150 my 
45' E-224 20' E-202 
12-15 ́ 
5-10' 30'/60 °C E-224 20'/60 °C E-202 
3-4h. E-224 2h. E-202 P320
URKI-NATO
E-277 (indoors) E-225 (outdoors) 
3 h 
20-22" 
URKISOL 900P / 8229 25-30% 
35-45 my 
3-5 h Non Sticky. 
20' 
10-15' 70 ºC / 30' (In cabin) 
URKISOL 900/P / 8229 8-12 % 25-35" 0,009-0,011” 
URKISOL 900/P / 8229 8-12% 35-40" 0,009-0,011”
URKI-NATO SAT
E-277 (indoor) E-225 (outdoor) 
5 h. 
20-22" 
URKISOL 900P / 8229 15-20% 
35-45 my 
Touch free 30' Non sticky 3-4 h 
20' 
10-15' 70 ºC/30' (In cabin) 
URKISOL 900/P / 8229 8-12 % 25-35" 0,009-0,011” 
URKISOL 900/P / 8229 8-12% 35-40" 0,009-0,011”
General Information
2K SYSTEM
| Support type | Surface pretreatment |
|---|---|
| Steel | Degreased |
| Aluminum | Brushed |
| Galvanized | |
| Iron |
Sectors