Contact us if you have any question or you can't find the system you were looking for.
C-35 HEAT RESISTANT PAINT SYSTEM 450ºC
General Information
DIRECT SYSTEM
| Support type | Surface pretreatment |
|---|---|
| Steel | Degreased |
| Iron | Brushed |
| Sand-Blasting |
¿Quieres obtener más información?
ENVIAR CONSULTADESCRIPTION
Heat Resistant Paint System up to 450°C, based on special Resines modified with Silicone and Aluminium Black fume pigments resistant to high temperatures.
Provides resistance to continuous exposure to temperatures up to 450°C. Recommended for exhaust pipes, electric equipment, ovens, chimneys. Excellent mechanical features, adhesion and anti rust protection.
RESISTANCE AND CERTIFICATES
TEMPERATURE RESISTANCE F-4101/A 450°C
The System develops all its features once temperature cured. Do not exceed the recommended film thickness.
TEMPERATURE RESISTANCE F-4101/N 450 °C
PRODUCTS
F-4101 A
450°C Heat Resistant Paint
| Physical properties | |
|---|---|
| Type of product | Special Synthetic |
| Density 20 °C | 1,20 ± 0,05 |
| Supply viscosity at 20 °C | 60 - 70 KU (Stormer) |
| Solid Content (% weight) | 50 - 54% |
| Solid Content (% volume) | 32 - 36% |
| V.O.C. | 560 g/l (ready to use) |
| Color | s/m URKI-SYSTEM |
| Features of dry film | |
|---|---|
| Theoretical yield | 13 - 14 m² / l. (25 my) |
| Gloss 60 - 60° | Matt < 5% |
| Recoatability | Wet on wet (30 min.) |
F-4101 N
450°C Heat Resistant Paint
| Physical properties | |
|---|---|
| Type of product | Special Synthetic |
| Density 20 °C | 0,95 ± 0,03 |
| Supply viscosity at 20 °C | 50 - 60 sec. Ford n.° 4 |
| Solid Content (% weight) | 21 - 25% |
| Solid Content (% volume) | 11 - 15% |
| V.O.C. | 730 g/l (ready to use) |
| Color | Black 9005 |
| Features of dry film | |
|---|---|
| Theoretical yield | 6 - 7 m² / l. (20 my) |
| Gloss 60 - 60° | Matt Satin 10 - 15% |
| Recoatability | 1 h. |
IMPLEMENTATION PROCESS
SURFACE PREPARATION
STEEL
The surfaces should be thoroughly degreased and deoxidized or shotblasted. Recommendable shotblasted to Sa 2½.
APPLICATION
F-4101/A
15-20" 
Supply viscosity 
URKISOL 170 30-35% Ø 1,6-1,8 mm. 
20-25 my 
Tack free 15 ́ Non Sticky. 30 ́ 100º C/15 ́ 
5-10 ́
F-4101/N
Tack free 15' Non Sticky. 30' 100 °C/15' 
15-17” 
Supply viscosity 
URKISOL 88 55-60% Ø 1,6-1,8 mm. 
15-20 my 
5'
General Information
DIRECT SYSTEM
| Support type | Surface pretreatment |
|---|---|
| Steel | Degreased |
| Iron | Brushed |
| Sand-Blasting |