B-40 WATERBORNE EPOXY - ACRYL SYSTEM

epoxi b40 base sistema agua
General Information
2K SYSTEM
CORROSIVITY: C3 | HIGH
Support type Surface pretreatment
Steel Degreased
Shotblasted steel Brushed
Aluminum Sand-Blasting
Galvanized
Iron
Products

¿Quieres obtener más información?

ENVIAR CONSULTA

DESCRIPTION

URA-POX 028 outstands for its quick drying and hardening. Allows the use of succesive layers with 1-2 hours to achieve the required thickness.
URA-PUR 360 is a waterborne enamel that can be used for painting machinery, industrial vehicle, agricultural and public works machinery, wagons, where there is a demand of high glass, hardeness and
flexibility. Resistant to water chemical agents and petrol as high outdoor resistance.

RESISTANCE AND CERTIFICATES

480 H SALT SPRAY TEST

An independent approved Laboratory certifies that this System meets the requirements for category C4 High in accordance to ISO 12944-2 (Shotblasted Steel Sa 2½).

240 H HUMIDITY TEST

PRODUCTS

Physical properties
Type of productEpoxy - Zinc Phosphate
Density 20 °C1,45 ± 0,05
Supply viscosity at 20 °C95 - 105 KU
Solid content (% weight)50 - 60% (mixed with hardener)
Solid Content (% volume)43 - 47% (mixed with hardener)
V.O.C.< 180 g/l (ready to use)
Color7035 Grey, 8012 Oxyde
Features of dry film
Theoretical yield8 - 9 m² / l. (50 my)
Gloss 60 - 60°Matt 5-10%
Recoatability1-2h.

Physical properties
Type of productEpoxy - Zinc Phosphate
Density 20 °C1,45 ± 0,05
Supply viscosity at 20 °C95 - 105 KU
Solid content (% weight)50 - 60% (mixed with hardener)
Solid Content (% volume)43 - 47% (mixed with hardener)
V.O.C.< 180 g/l (ready to use)
Color7035 Grey, 8012 Oxyde
Features of dry film
Theoretical yield8 - 9 m² / l. (50 my)
Gloss 60 - 60°Matt 5-10%
Recoatability1-2h.

IMPLEMENTATION PROCESS

SURFACE PREPARATION

SHOTBLASTED STEEL
The surface should be shotblasted to Sa 2½ and primed with URA-POX 028.

APPLICATION

URA-POX 028
  • U-502 6.25:1 weight
  • 2 h
  • 40-50" Spraygun
  • WATER 25-27%
  • 40-60 my
  • Non sticky 2 h
  • 30 min 30-60' / 40-60 °C (In cabin)
  • WATER 20-22% 60-70"
  • WATER 15-20% 80-120"
URA-PUR 360
  • U-422
  • 3 h.
  • 40-50" Spraygun 60-70" Air-Mix 70-100" Air-Less
  • WATER 25-30%
  • 50-75 my
  • Non Sticky 4-5 h
  • 30' 45-60'/50-60 ºC (In cabin)
  • WATER 20-25%
  • WATER 10-20%
General Information
2K SYSTEM
CORROSIVITY: C3 | HIGH
Support type Surface pretreatment
Steel Degreased
Shotblasted steel Brushed
Aluminum Sand-Blasting
Galvanized
Iron
Products

Contact us if you have any question or you can't find the system you were looking for.

Select the download language

Select the download file language