Waterborne clear coat for glass. Conventional spray.
Due to the wide variety of glass as a substrate, careful checks on the cure and adhesion should be carried out before using this product. The products require the addition of adhesion promoter VA8450 before use.
High mechanical properties, hardness and elasticity .High chemical, G1 solution, and water resistance.
Mix well before use.
Mix the Adhesion promoter VA8450 slowly with a low speed stirrer with the clear coat.
Add 0-20 parts of the color to the clear coat.
Add the colors one by one with a low speed stirrer. Adjust viscosity application with demineralized water
Mix carefully and filter 125 microns.
|Density at 20°C (g/cc)||1,10 ± 0,02|
|Supply viscosity at 20°C||75 - 95 KU|
|% Solids content (weigth/volume)||38 % ± 2 peso|
|Type of product||Acrílica secado horno|
|pH 20°C||8 - 9|
The surface should be dry and free from dust, dirt grease and oil
It is recommended to flame the substrate.
Substrate temperature should no be higher than 40 °C.
|Gloss 60° - 60°||10 ± 1 (flat glass)|
Keep under cover in a cool and well-ventilated place avoiding direct sunlight. Temperatures between 5 and 30°C recommended.
Can life: 6 months from manufacturing in date its original unopened container. Consult our Technical Department once date has expired.