Contact us if you have any question or you can't find the system you were looking for.
C-05 SINGLE COAT SYSTEM
General Information
DIRECT SYSTEM
| Support type | Surface pretreatment |
|---|---|
| Steel | Degreased |
| Iron | Brushed |
¿Quieres obtener más información?
ENVIAR CONSULTADESCRIPTION AND FEATURES
System specially designed for agricultural machinery, public works, fork lifts, metallic structures, containers, etc.
Its tixothropical aspect allows, with a minimum risk of sagging, the use of high pressure equipment in difficult geometry parts where high thickness can be applied. Semigloss finish with good extensibility, quick drying and direct adhesion on steel.
RESISTANCE AND CERTIFICATES
150 H SALT SPRAY TEST
This system resists 150 hours on the Salt Spray Test in accordance to ISO 9227:2007.
If a higher resistance is required, use on on F- 862 or F- 29.
PRODUCTS
URKI-RAPID 70
1K DTM Semi-Gloss Enamel
| Physical properties | |
|---|---|
| Type of product | Modified Alkyd |
| Density 20 °C | 1,10 - 1,25 |
| Supply viscosity at 20 °C | 70 - 80 KU (Stormer) |
| Solid Content (% weight) | 53 - 61% |
| Solid Content (% volume) | 41 - 45% |
| V.O.C. | 591 g/l (ready to use) |
| Color | s/m URKI-SYSTEM |
| Features of dry film | |
|---|---|
| Theoretical yield | 12 - 13 m² / l. (35 my) |
| Gloss 60 - 60° | >70% |
| Recoatability | Before 1 h. or after 3 days |
IMPLEMENTATION PROCESS
SURFACE PREPARATION
STEEL
The surfaces should be thoroughly degreased and deoxidized.
APPLICATION
URKI-RAPID/70
20-30" 
URKISOL 300 25-30% Ø 1,4-1,6 mm. 
30-40 my 
Non Sticky. 4-5 h. 
URKISOL 300 10-15% 0,011-0,013" 
URKISOL 300 10-15% 0,011-0,013"
General Information
DIRECT SYSTEM
| Support type | Surface pretreatment |
|---|---|
| Steel | Degreased |
| Iron | Brushed |