C-15 2K UNIVERSAL SINGLE COAT PUR SYSTEM

pur sistema dtm monocapa c15 pintura
General Information
DIRECT SYSTEM
Support type Surface pretreatment
Steel Degreased
Stainless steel Brushed
Aluminum
Galvanized
Iron
PVC
ABS Plastic
GRP
Ceramics
Glass
PUR
PC
MA
Brass

¿Quieres obtener más información?

ENVIAR CONSULTA

DESCRIPTION AND FEATURES

Topcoat with a good physical- chemical resistance both in High gloss and Satin which does not yellow outdoors. Direct adhesion on Steel, Galvanized, Aluminium, Brass, Glass, Ceramics and Plastics, such as ABS, PUR, PC, PMMA, GRP and PVC.

Can be also painted on precoated enclosures, previously degreased with URKISOL 88 with a very good adhesion. Depending on the precoatings nature, might be necessary sanding.

RESISTANCE AND CERTIFICATES

200 H SALT SPRAY TEST

This system resists 200 hours on the Salt Spray Test in accordance to ISO 9227:2007.

PRODUCTS

BESA-NATO 2K DTM Acrylic Enamel

Physical properties
Type of productAcrylic- Polyurethane Aliphatic
Density 20 °C1,00 - 1,25
Supply viscosity at 20 °C70 - 95 KU (Stormer)
Solid Content (% weight)52 - 60% (mixed with hardener)
Solid Content (% volume)45 - 48% (mixed with hardener)
V.O.C.548 g/l (ready to use)
Colors/m URKI-SYSTEM
Features of dry film
Theoretical yield10 - 11 m² / l. (45 my)
Gloss 60 - 60°>95%
Recoatability18 h.

BESA-NATO SAT 2K DTM Acrylic Satin Enamel

Physical properties
Type of productAcrylic- Polyurethane Aliphatic
Density 20 °C1,00 - 1,25
Supply viscosity at 20 °C65 - 75 KU (Stormer)
Solid Content (% weight)50 - 60% (mixed with hardener)
Solid Content (% volume)40 - 50% (mixed with hardener)
V.O.C.548 g/l (ready to use)
Colors/m URKI-SYSTEM
Features of dry film
Theoretical yield8 - 10 m² / l. (45 my)
Gloss 60 - 60°10-30%
Recoatability18 h.

IMPLEMENTATION PROCESS

SURFACE PREPARATION

STEEL, ALUMINIUM, GALVANIZED, PLASTICS
The surfaces should be thoroughly degreased and deoxidized. Use Thinner Nr 94 on plastics, excepting PVC which shall be cleaned with Urkisol 88.

APPLICATION

BESA-NATO GLOSSY
  • E-224 (*)
  • >3h.
  • 20-30"
  • URKISOL 8229/900P 15-20% Ø 1,4-1,6 mm.
  • 40-50 my
  • Non Sticky 4-5 h.
  • 10-15' 70 °C/30' (En cabin)
  • 20 ́
  • URKISOL 8229 10-15% 0,009-0,011" (**)
  • URKISOL 8229 10-15% 0,009-0,011" (**)

*Use E- 745 as accelerator (do not use hardener E- 202 or E- 750 accelerator)
**For certain Airmix and Airless equipments use URKISOL 8220.

BESA-NATO SATIN
  • E-224 (*)
  • 3h.
  • 20-30"
  • URKISOL 8229/900P 15-20% Ø 1,4-1,6 mm.
  • 40-50 my
  • Non Sticky 3-4 h.
  • 10-15 ́ 70ºC/30 ́ (En cabin)
  • 20 ́
  • URKISOL 8229 10-15% 0,009-0,011"
  • URKISOL 8229 10-15% 0,009-0,011"

*Use E- 745 as accelerator (do not use hardener E- 202 or E- 750 accelerator)
**For certain Airmix and Airless equipments use URKISOL 8220.

General Information
DIRECT SYSTEM
Support type Surface pretreatment
Steel Degreased
Stainless steel Brushed
Aluminum
Galvanized
Iron
PVC
ABS Plastic
GRP
Ceramics
Glass
PUR
PC
MA
Brass

Contact us if you have any question or you can't find the system you were looking for.

Select the download language

Select the download file language