B-25 LOW VOC EPOXY ACRYLIC- PUR SYSTEM

bajo voc b25 acrilico epoxi pur sistema
General Information
2K SYSTEM
CORROSIVITY: C4 | HIGH
Support type Surface pretreatment
Steel Degreased
Shotblasted steel Brushed
Aluminum Sand-Blasting
Galvanized
Iron

¿Quieres obtener más información?

ENVIAR CONSULTA

DESCRIPTION

Paint System developed for Commercial Vehicle , machinery in general and any other sector where a high resistance both to oxidation and open air, as well as a reduction in VOC is demanded.

F-296/2 Ultra High Solid Primer, formulated with an Epoxy resine and hardened with Polyamide with its high content of antirust pigment provides the system an excellent antirust protection. Suitable for wet on wet application after 20-30 minutes. The URKI-VOC Ultra High Solid topcoat offers excellent elasticity, body, gloss and outdoor resistance.

This system is compliant with the current legislation in the European Directive 2004/42/CE for Car Refinish. Also used as an alternative to conventional processes for the reduction of VOC emissions, in order to help fulfill the Directive 1999/13/CE. The system fulfills the requirements of the Test of Global Migration referred to the contact with food for the simulants B and D2 of Directive 85/522/CEE, based on Regulation 10/2011.

RESISTANCE AND CERTIFICATES

720 H SALT SPRAY TEST

An independent approved Laboratory certifies that this System meets the requirements for category C4 High in accordance to ISO 12944-2 (Shotblasted Steel Sa 2½).

480 H HUMIDITY TEST

The system is certified by IANESCO (12/13612) and meets the limits of global migration for the simulants B and D2, that represent some non alcoholic, aqueous, acid and fatty food.

PRODUCTS

F-296/2 2K UHS Epoxy Primer

Physical properties
Type of productZinc Phosphate Epoxy Polyamide
Density 20 °C1,68 ± 0,05
Supply viscosity at 20 °C70 - 75 KU (Stormer)
Solid Content (% weight)

41 - 45% (mixed with hardener)

Solid Content (% volume)43 - 47% (mixed with hardener)
V.O.C.456 g/l (ready to use)
ColorGrey 7035, Beige 1111
Features of dry film
Theoretical yield8 - 9 m² / l. (50 my)
Gloss 60 - 60°Matt Satin
Recoatability20 - 30 min.

URKI-VOC 2K Low Voc Acrylic Enamel

Physical properties
Type of productPolyester Polyurethane
Density 20 °C1,05 - 1,30
Supply viscosity at 20 °C80 - 90 KU (Stormer)
Solid Content (% weight)55 - 64% (mixed with hardener)
Solid Content (% volume)54 - 58% (mixed with hardener)
V.O.C. (2004/42/CE) II B. (d) (420)417 g/l (ready to use)
Colors/m URKI-SYSTEM
Features of dry film
Theoretical yield10 - 11 m² / l (40/60 my)
Gloss 60 - 60°> 90%
Recoatability3 h. after cabin drying. To use it as antigraffiti, it needs to be sanded and degreased.

IMPLEMENTATION PROCESS

SURFACE PREPARATION

STEEL, ALUMINIUM & GALVANIZED
The surfaces should be thoroughly degreased and deoxidized.

APPLICATION

F-296/2
  • E-344 5,5:1 weight
  • 24 h
  • 25-35"
  • No dilution. For touch up.
  • URKISOL 357 / 394 10-15% Ø 1,6-1,8 mm.
  • 50-100 my
  • Non sticky 45'
  • 15-30' 80 °C/30 min. (In cabin)
  • URKISOL 394 3% max. 0,013-0,015"
  • URKISOL 394 3% max. 0,013-0,015"
URKI-VOC
  • Medium E-225/E-243 Fast E-202/E-203
  • 3 h
  • 20±2"
  • URKISOL 8229 / 3700 20-25% 1,4-1,6
  • 55-65 my
  • 4-5h E-225/E243 3-4h. E-202 2,5h. E-203 Non Sticky.
  • Onda media E-225/E-243 20' E-202 15' E-203 12'
  • 15-30' 60-70 ºC/30' (In cabin)
  • URKISOL 8229 / 3700 0-5% 0,009-0,011”
General Information
2K SYSTEM
CORROSIVITY: C4 | HIGH
Support type Surface pretreatment
Steel Degreased
Shotblasted steel Brushed
Aluminum Sand-Blasting
Galvanized
Iron

Contact us if you have any question or you can't find the system you were looking for.

Select the download language

Select the download file language