Contact us if you have any question or you can't find the system you were looking for.
Support type | Surface pretreatment |
---|---|
Steel | Degreased |
Shotblasted steel | Brushed |
Aluminum | Sand-Blasting |
Galvanized | |
Iron |
¿Quieres obtener más información?
ENVIAR CONSULTAPaint system specially developed for trailers, semitrailers, tankers, cement mixers, metallic structures,etc...
F-296/2 Ultra High Solid Primer, formulated with an Epoxy resine and hardened with Polyamide with its high content of antirust pigment offers the system an excellent antirust prection. Suitable for wet on wet application after 20-30 minutes.
Alfapur 3790 topcoat offers excellent elasticity, body, gloss and outdoor resistance. This system is compliant with the current legislation in the European Directive 2004/42/CE for Car Refinish. Also used as an alternative to conventional processes for the reduction of VOC emissions, in order to help fulfill the Directive 1999/13/CE .
Physical properties | |
---|---|
Type of product | Zinc Phosphate Epoxy Polyamide |
Density 20 °C | 1,68 ± 0,05 |
Supply viscosity at 20 °C | 70 - 75 KU (Stormer) |
Solid Content (% weight) | 66 - 70% (mixed with hardener) |
Solid Content (% volume) | 41 - 45% (mixed with hardener) |
V.O.C. (2004/42/CE) II B. (c) (540) | 456 g/l (ready to use) |
Color | Creme 1111 |
Features of dry film | |
---|---|
Theoretical yield | 8 - 9 m² / l. (25 my) |
Gloss 60 - 60° | Matt Satin |
Recoatability | 20 - 30 min. |
Physical properties | |
---|---|
Type of product | Polyester Polyurethane |
Density 20 °C | 1,16 - 1,43 |
Supply viscosity at 20 °C | 55 - 85 sec. Ford n.° 4 |
Solid Content (% weight) | 60 - 67% (mixed with hardener) |
Solid Content (% volume) | 47 - 50% (mixed with hardener) |
V.O.C. (2004/42/CE) II B. (d) (420) | 417 g/l (ready to use) |
Color | s/m URKI-SYSTEM |
Features of dry film | |
---|---|
Theoretical yield | 9 - 10 m² / l (40 my) |
Gloss 60 - 60° | 90 - 100% |
Recoatability | 8 h. or 3 h. after cabin drying |
STEEL, ALUMINIUM AND GALVANIZED
The surfaces should be thoroughly degreased and deoxidized or shotblasted.
Support type | Surface pretreatment |
---|---|
Steel | Degreased |
Shotblasted steel | Brushed |
Aluminum | Sand-Blasting |
Galvanized | |
Iron |
Contact us if you have any question or you can't find the system you were looking for.