Contact us if you have any question or you can't find the system you were looking for.
B-21 EPOXY PUR R-1 SYSTEM
General Information
2K SYSTEM
| Support type | Surface pretreatment |
|---|---|
| Steel | Degreased |
| Shotblasted steel | Brushed |
| Aluminum | Sand-Blasting |
| Galvanized | |
| Iron |
Sectors
¿Quieres obtener más información?
ENVIAR CONSULTADESCRIPTION
System designed for painting railway vehicules, compliant with the norm EN 45545 to protect passengers and staff from fire.
F-294/2 High Solid Primer formulated with an Epoxy resine and hardened with Polyamide with its high content of antirust pigment offers the system an excellent antirust protection.
URKI-NATO offers excellent properties in hardness, elasticity, resistance to abrasive agents such as soap, fuel, grease, oil, chemical products, etc.
As topcoat it can be used Urki-Nato, URKI-NATO Sat and with textured effect or as antigraffiti.
RESISTANCE AND CERTIFICATES
1000 H SALT SPRAY TEST
The system resists 1000h. on the salt spray test in cast iron steel in accordance to UNE ISO 9227-2007 EN.
Risks levels HL1, HL2 & HL3 have been achieved according to Norm UN EN 45546 following the requirements from Norm R1, R2, R3, R7 & R17.
PRODUCTS
F-294/2
2K High Build Epoxy Primer
| Physical properties | |
|---|---|
| Type of product | Epoxy Polyamide |
| Density 20 °C | 1,64 ± 0,05 |
| Supply viscosity at 20 °C | 80 - 90 KU (Stormer) |
| Solid Content (% weight) | 66 - 70% (mixed with hardener) |
| Solid Content (% volume) | 43 - 47% (mixed with hardener) |
| V.O.C. | 514 g/l (ready to use) |
| Color | Grey 7035, Beige 1111 |
| Features of dry film | |
|---|---|
| Theoretical yield | 8 - 9 m² / l. (50 my) |
| Gloss 60 - 60° | Matt Satin 5 - 10% |
| Recoatability | 20 - 30 min. |
URKI-NATO
2K Polyurethane Enamel
| Physical properties | |
|---|---|
| Type of product | Polyester Polyurethane |
| Density 20 °C | 1,05 - 1,30 |
| Supply viscosity at 20 °C | 80 - 90 KU (Stormer) |
| Solid Content (% weight) | 55 - 64% (mixed with hardener) |
| Solid Content (% volume) | 48 - 51% (mixed with hardener) |
| V.O.C. | 540 g/l (ready to use) |
| Color | s/m URKI-SYSTEM |
| Features of dry film | |
|---|---|
| Theoretical yield | 12 - 13 m² / l (40 my) |
| Gloss 60 - 60° | >95% |
| Recoatability | 18 h (After this time degrease). To use it as antigraffiti it needs to be sanded and degreased. |
URKI-NATO SAT
2K Satin Polyurethane Enamel
| Physical properties | |
|---|---|
| Type of product | Polyester Polyurethane |
| Density 20 °C | 1,10 ± 1,35 |
| Supply viscosity at 20 °C | 100 - 120 sec. Ford n.° 4 |
| Solid Content (% weight) | 55 - 64% (mixed with hardener) |
| Solid Content (% volume) | 44 - 48% (mixed with hardener) |
| V.O.C. | 546 g/l (ready to use) |
| Color | s/m URKI-SYSTEM |
| Features of dry film | |
|---|---|
| Theoretical yield | 11 - 12 m² / l (40 my |
| Gloss 60 - 60° | 20-30% (E-225) |
| Recoatability | 12 h. To use it as antigraffiti it needs to be sanded and degreased. |
IMPLEMENTATION PROCESS
SURFACE PREPARATION
CAST IRON STEEL
The surfaces should be degreased and free of dust.
APPLICATION
F-294/2
E-344 5:1 weight 
24 h 
25-35" 
No dilution. For touch up. 
URKISOL 357 / 394 10-15% Ø 1,6-1,8 mm. 
50-100 my 
Non sticky 45' 
15-30' 80 °C/30 min. (In cabin) 
URKISOL 394 5-10% 0,013-0,015" 
URKISOL 394 5-10% 0,013-0,015"
URKI-NATO
E-277 (interior) E-225 (exterior) 
5 h. 
20-22" 
URKISOL 900P / 8229 25-30% 
35-45 my 
Non sticky. 3-5 h. 
20' 
15-30' 70 ºC/30' (In cabin) 
URKISOL 900/P / 8229 8-12 % 0,009-0,011” 25-35" 
URKISOL 900/P / 8229 8-12% 0,009-0,011” 35-40"
URKI-NATO SAT
E-277 (indoor) E-225 (outdoor) 
5 h. 
20-22" 
URKISOL 900P / 8229 15-20% 
35-45 my 
Touch free 30' Non sticky 3-4 h 
20' 
15-30' 70 ºC/30' (In cabin) 
URKISOL 900/P / 8229 8-12 % 0,009-0,011” 25-35" 
URKISOL 900/P / 8229 8-12% 0,009-0,011” 35-40"
General Information
2K SYSTEM
| Support type | Surface pretreatment |
|---|---|
| Steel | Degreased |
| Shotblasted steel | Brushed |
| Aluminum | Sand-Blasting |
| Galvanized | |
| Iron |
Sectors