POSTS
URKI-NATO SAT 2K Satin Polyurethane Enamel
General Information
| Application | |
|---|---|
| Airbrush | |
| Airmix | |
| Airless |
| Quality | Gloss |
|---|---|
| 2K | Satin |
PRODUCT DESCRIPTION
"USE ONLY IN INDUSTRIAL FACILITIES"
Recommended for the painting of Machines Tools, Metallic Furniture, Machinery used for Public Works, Closures, etc.
It presents a remarkable resistance to aggressive agents, hardness and resistant to scratching, a high elasticity, body and a pleasant Satin Finish.
Fire retardant (M1). Homologated according to UNE 23727-90. Tested according to UNE 23721-90. It is classified as F1 according to the norm NF F-16101 (previously primed with BESA-CAR).
URKI-NATO, in every gloss level (URKI-NATO or URKI-NATO SAT) is classified as R1,R9 according to the norm EN 45545 when it is applied onto F-294/2 or BESA-CAR.
URKI-NATO SAT with Textured finish and applied on BESA-CAR, is classified as R10 (Test of Critical sliding angle according to DIN 51130).
APPLICATION
E-277 (Indoors) E-225 (Outdoors) 3:1 vol. 
5 h. 
20-22" 
URKISOL 900/P or 8229 15-20 % 
35-45 µm 
Touch Free 30 ́ Tack Free 3-4 h. 
20' 
In cabin 10-15' 70°C/30' 
URKISOL 900/P / 8229 8-12% 0,009-0,011" 25-35 " 
URKISOL 900/P / 8229 8-12% 0,009-0,011" 35-40 "
Leave the mixture settle 15 minutes before starting the application.
To use it as ANTIGRAFFITI, use ADITIVE 51 ANTIGRAFFITI instead of the recommended thinner. See Aditive Technical Data Sheet.
For a structure effect use TEXT STRUCTURE ADDITIVE GR3 or Corundum. See additive Technical Data Sheet.
DATA SHEET
PHYSICAL PROPERTIES
| Density at 20°C (g/cc) | 1,10-1,35 |
| Grinding Fineness (μ) | 20-25 |
| Supply viscosity at 20°C | 100-120" Ford n° 4 |
| % Solids content (weigth / volume) | 58-66% weight; 46-50% volume. (Mixture with hardener E-277) 55-64% weight; 44-48% volume. (Mixture with hardener E-225) |
| VOC (g/l) | 546 (Ready to use) |
| Type of product | Polyurethane Polyester |
| Color | URKI-SYSTEM. RAL, UNE, NCS, BS, etc. |
SURFACE PREPARATION
-Steel: Deoxidized and degreased. Prime with F-714 SHOP-PRIMER. If an enhanced rust inhibitor process is required, prime with F-282/2 2 K Zinc Phosphate Epoxy Primer.
-Galvanized: Degreased. if it is old, brush and degrease. Prime with F-282/2 or F-286/2 2 K Epoxy SHOP-PRIMER. before finishing with URKI-NATO SAT.
-Aluminium: As for galvanized.
FEATURES OF DRY FILM
| Theoretical yield (m²/l) | 11-12 (40 µm) |
| Gloss 60° - 60° | 35-45% (E-277); 20-30% (E-225) |
| Second layer | 12 hours. If the product is used as antigraffiti, it needs to be sanded and degreased. |
Mixing (weight) with U-Nato Converter or F-755 universal Matcher, a higher gloss range or a lower gloss range can be obtained.
To achieve the degree of gloss as indicated in the table make sure all products are correctly mixed.
E-225
| URKI-NATO SAT | 90 | 85 | 80 | 90 | 75 |
| URKI-NATO | 10 | 15 | 20 | - | - |
| F-755 | - | - | - | 10 | 25 |
| Gloss 60° - 60° | 40-50 | 55-60 | 65-75 | 10-20 | 5-10 |
E-277
| URKI-NATO SAT | 90 | 85 | 80 | 90 | 75 |
| URKI-NATO | 10 | 15 | 20 | - | - |
| F-755 | - | - | - | 10 | 25 |
| Gloss 60° - 60° | 65-70 | 70-75 | 80-85 | 25-35 | 10-15 |
The values shown in the table are for guidance only.
The indicted degree of gloss are achieved with the above mentioned thicknesses (35-45 my).
STORAGE
Keep under cover in a cool and well-ventilated place avoiding direct sunlight. Temperatures between 5 and 30 °C recommended.
Can life: 2 years from manufacturing in date its original unopened container. Consult our Technical Department once date has expired.
COVERAGE CALCULATOR
How much do you need?
Find out by using our Coverage Calculator
Amount of product requiredKgi
General Information
| Application | |
|---|---|
| Airbrush | |
| Airmix | |
| Airless |
| Quality | Gloss |
|---|---|
| 2K | Satin |
RELATED PRODUCTS
Products that may interest you
DO YOU WANT TO IMPROVE YOUR KNOWLEDGE AND WORK PROCESSES?
POSTS
TRAINING FOR SAFE USE OF DIISOCYANATES: EVERYTHING YOU NEED TO KNOW
POSTS
Static Electricity in Painting: Hazards and measures to be taken
POSTS
Importance of Colour in Industrial Vehicle Repainting
POSTS
6 tips for coating paint with airless equipment
POSTS