High solids primer based on a epoxy resin hardened with polyamide and a high percentage zinc phosphate pigmentation. It provides an excellent anti-rust protection. Fast drying and recoatability.
Suitable for high resistance processes in 2K systems. Painting of lorry tank coatings, cement mixers, metallic structures, etc.
Excellent adhesion on steel, sluminium and galvanized.
F-294/2 meets the requirements of category C3 HIGH s/UNE ISO 12944-2 certified by an external laboratory (Steel Sa 2½ and finished with ALFA-PUR 3748).
F-294/2 along with URKI-NATO or URKI-NATO SAT is classified as R1,R9 according to the norm EN 45545.
Air-less Spray-gun: Max. 10% vol. of URKISOL 394 or 357, in two crossed passed. When applied in high temperatures we recommend to use URKISOL 395 or URKISOL 397.
|Density at 20°C (g/cc)||1,64 ± 0,05|
|Grinding Fineness (μ)||15 - 25|
|Supply viscosity at 20°C||80 - 90 KU (Stormer)|
|% Solids content (weigth / volume)||68 % ± 2 weight; 45 % ± 2 volume. (Mixture with hardener)|
|VOC (g/l)||514 (Ready to use) - (2004/42/CE) IIB (C) (540)|
|Type of product||Epoxy-Polyamide|
|Color||Beige 1111, Grey 7035|
Deoxidising and manual degreasing of the surfaces: previous sand-blasting Sa 2,5 is recommended.
In order to apply the product correctly the temperature should exceed 10°C and the relative humidity should be below 75%.
Oven drying is allowed at 80-100°C for 15-30 min.
It can be repainted with URKI-POX, ALFAPUR 3748, URKI-ANTO, BESA-GLASS, URKI-GLASS or URKI-VOC.
|Theoretical yield (m2/l)||8 - 9 (50 µm)|
|Gloss 60° - 60°||Matt-Sat. 5-10 %|
|Second layer||20 - 30'|
Keep under cover in a cool and well-ventilated place avoiding direct sunlight. Temperatures between 5 and 30°C recommended.
Can life: 2 years from manufacturing in date its original unopened container. Consult our technical department once date has expired.