"USE ONLY IN INDUSTRIAL FACILITIES"
Matt enamel, does not yellow. Good physicochemical resistance and direct adhesion on many surfaces: Steel, Stainless Steel, Aluminium, Brass, Galvanized, Glass, Plastics ABS, PUR, PC, MA, GRP, Ceramic, PVC.
Up to 200 hours in the Salt Spray Test on Shotblasted Steel.
Aerographic application: Dilute with Thinner URKISOL 8229 or URKISOL 900/P.
In summer or warm days, to use URKISOL 3700.
Leave paint settle 15 minutes before painting.
For application with Airmix Equipment, with no dilution, viscosity of mixture with hardener.
As accelerator use E-745 (do not use hardener E-202 or accelerator E-750).
|Density at 20 °C (g/cc)||1,00 - 1,25|
|Grinding Fineness (μ)||5 - 10|
|Supply viscosity at 20 °C||65 - 75 KU (Stormer)|
|% Solids content (weigth / volume)||50 - 60 % weight; 40 - 50 % volume. (Mixture with hardener)|
|V.O.C. (g/l)||527 (Ready to use)|
|Type of product||Acrylic Polyurethane Aliphatic|
The surface must be free of rust, grease and dirt.
Galvanized: if old, brush and degrease.
On Plastics clean with URKISOL 94 in case of PVC, degrease with URKISOL 88.
On powder coatings and coal coatings, a previous sanding is recommended. After it, degrease with URKISOL 300. Depending on the type and conditions of the support.
|Theoretical yield (m²/l)||8 - 10 (45 my)|
|Gloss 60° - 60°||10 - 15 %|
|Second layer||18 h.|
Keep under cover in a cool and well-ventilated place avoiding direct sunlight. Temperatures between 5 and 30 °C recommended.
Can life: 2 years from manufacturing in date its original unopened container. Consult our Technical Department once date has expired.