Application | |
---|---|
Airbrush | |
Airmix | |
Airless |
Quality | Gloss |
---|---|
2K | Satin |
"USE ONLY IN INDUSTRIAL FACILITIES"
Suitable for the protection of metalic surfaces exposed to very aggressive environments, in the chemical industry, seashore, etc. It goes yellow outdoors. It may be applied High Build with Airless Spray Gun. Shows excellent mechanical properties, combining hardness and elasticity; because of its chemical nature it shows a high resistance to grease and oil, acids, thinner, alkaline and Salt Solutions. Great waterproofer.
For air-less equipment, dilute with 20-25% of URKISOL 357.
Remark: With temperature below 10°C and a relative humidity above 75%, drying process may be delayed and blooming may appear. E-316 Hardener is less sensitive to humidity.
Density at 20 °C (g/cc) | 1,17 - 1,38 |
Grinding Fineness (μ) | 30 - 40 |
Supply viscosity at 20 °C | 70 - 85 KU (Stormer) |
% Solids content (weigth / volume) | 60 - 70% weight; 48 - 51 % volume. (Mixture with hardener) |
V.O.C. (g/l) | 456 (Mixture with hardener) |
Type of product | Epoxy / Polyamide |
Colour | URKI-SYSTEM |
-Steel: Deoxidized and degreased. Prime with F-282/2, F-294/2 2K Zinc Phosphate Epoxy Primer or F-286/2 2K Epoxy Shop-Primer. In processes of high resistance to humidity or maritime environments, shot-blast and prime with F-284/2 2K Zinc Rich Epoxy Primer.
-Galvanized: Degrease. If it is old, brush and degrease. Prime with F-282/2, F-294/2 or F-286/2.
Theoretical yield (m²/l) | 5,5 - 5,0 (65 my) |
Gloss 60° - 60° | 25 - 35 % |
Second layer | 24 h. |
Keep under cover in a cool and well-ventilated place avoiding direct sunlight. Temperatures between 5 and 30 °C recommended.
Can life: 1 year from manufacturing in date its original unopened container. Consult our Technical Department once date has expired.
Find out by using our Coverage Calculator
Application | |
---|---|
Airbrush | |
Airmix | |
Airless |
Quality | Gloss |
---|---|
2K | Satin |