"USE ONLY IN INDUSTRIAL FACILITIES"
Recommended for the painting of Machines Tools, Metallic Furniture, Machinery used for Public Works, Closures, etc.
It presents a remarkable resistance to aggressive agents, hardness and resistant to scratching, a high elasticity, body and a pleasant Finish, between satin and silky matt.
Leave the mixture settle 15 minutes before starting the application.
To use it as ANTIGRAFFITI, use ADITIVE 51 ANTIGRAFFITI instead of the recommended thinner. See Aditive Technical Data Sheet.
You can use E-277 for indor aplications. Gloss level will slightly increase.
|Density at 20 °C (g/cc)||1,10 - 1,35|
|Grinding Fineness (μ)||20 - 25|
|Supply viscosity at 20 °C||65 - 85 KU. (Stormer)|
|% Solids content (weigth / volume)||55 - 63 % weight; 44 - 47 % volume. (Mixture with hardener E-225)|
|V.O.C. (g/l)||540 (Ready to use)|
|Type of produtc||Polyester Polyurethane|
|Colour||URKI-SYSTEM. RAL, UNE, NCS, BS, etc.|
-Steel: Deoxidized and degreased. Prime with F-714 SHOP-PRIMER. If an enhanced rust inhibitor process is required, prime with F-282/2 2 K Zinc Phosphate Epoxy Primer.
-Galvanized: Degreased. if it is old, brush and degrease. Prime with F-282/2, F-294/2 or F-286/2 2 K Epoxy SHOP-PRIMER. before finishing with URKI-NATO MATT 10.
-Aluminium: As for galvanized.
|Theoretical yield (m²/l)||11 - 12 (40 my)|
|Gloss 60° - 60°||5 - 15 % (E-225)|
|Second layer||12 hours. If the product is used as antigraffiti, it needs to be sanded and degreased.|
Keep under cover in a cool and well-ventilated place avoiding direct sunlight. Temperatures between 5 and 30 °C recommended.
Can life: 2 years from manufacturing in date its original unopened container. Consult our Technical Department once date has expired.