SB 5060 HS Solvent Basecoat

urkimixprosb 5060 detail

DESCRIPTION

2K single-stage developed topcoat to be applied and used in very high quality processes for the bodywork and vehicle refinish and for solid colors processes, offering great hiding power. In combination with BESA putties and primers, it guarantees a perfect finish, excellent gloss, aspect and durability, as demanded by the automotive or commercial fleet markets.

It’s a simple system with an excellent performance, easy to use and flexible for the reparation of any type of vehicle.

COLORS

Developed for the application of every solid color of any car manufacturer worldwide, ensuring the accuracy of the color.

The color chart is sorted in chromatic order, which is a great help when matching the colors. Furthermore, the use of the Spectrophotometer allows full access to the complete database, converting the color readings into the best and most accurate combination of colors.

COMPLETE VEHICLE PROCESS

SINGLE-STAGE SYSTEM

FAST
E-244
MEDIUM
E-243
SLOW
E-245
Mixing ratio
volume
2:1 V
Application
viscosity
% Dilution
20-25”
URKISOL 8229 | URKISOL 3700 | URKISOL 3725
10-25%
Pot-life2-3h.3-4h.3-4h.
Recommended
Strainers
125-190 μm
Gravity spraygun
Application pressure
1,2 – 1,4 mm
2-2,5 bar
Nr. of layers
Thickness
1 light, 1 or 2 standard
50-60 μm / 2-2.35 mils
Thinner evaporation
time
10 ́-15' between layers
Drying time
20°C (70°F)
60°C (140°F)
3h.
20’
4h.
30’
4-4,5h.
30’

APPLICATION INSTRUCTIONS

The application should start with a very thin layer to find out any possible mistake made during the preparation.
Continue with 1,5-2 regular coats for solid colors and 1 fade out control coat for effect, metallic or pearl colors. Flash-off between layers. With pearl and three-coat colors, apply thin layers until you achieve the original color. Prior to this, you must have applied the corresponding first coat which we advise to activate with 10% E-224 hardener.

With solid colors it’s very important not to exceed the recommended thickness in order to avoid thermoplastic phenomenon. It is recommended to activate the mixing 10% with E-224 hardener.
In spot repairs, it’s advisable to fade out. Apply the base coat to cover the repaired area, reduce the gun pressure and fade out the close areas. Flash-off until the whole area is evenly matt.

SURFACE PREPARATION

Degrease with SD-7/10, dry with a clean cloth and overpass a tack cloth.
It must be applied on thoroughly degreased surfaces and filled with BESACAR and BESAEXPRESS. On old paints or of unknown nature, it is recommended to apply a thin layer of the isolating filler BESAWET.

INFORMACIÓN RELACIONADA

SAFETY AND HYGIENE

Recommendable to use the appropriate personal protective equipment during the application to avoid irritation of breathing tract, skin and eye irritation. Only for professional use.

STORAGE

Keep covered in a dry and ventilated place avoiding direct exposure to sunlight. We advise temperature above 5°C (50°F), recommended between 15-30°C (60-85°F).

VOC

The VOC content of URKIMIX PRO SB 5050 is higher than 420g/l.

PRODUCT NOTE

The information contained in this Technical Specification Sheet is based on the knowledge and experience of the BESA technical department, and with it it’s intended to advice and inform, being the responsibility of the user to take the necessary measures to guarantee the intended purpose of the product. FOR PROFESSIONAL USE ONLY.

RELATED PRODUCTS

Products that may interest you

Enter your data

Select the language of the sheet to download