URKI-DRY Dry Guide Coat

lijado detail urki en dry guia spray de

DESCRIPTION

SPRAY URKI-DRY it is an easy-sanding black acrylic paint used as a sanding guide in spray to achieve a smooth and flawless surface.
With very short drying time and avoiding the sagging of the sandpaper.

APPLICATION

  • pintado de distancia Painting range 20-30 cm
  • spray numero manos 1 spraying layer
  •  tiempo secado Dry 5 min.

Shake the can during 2-3 minutes before use the SPRAY URKI-DRY.
Apply 1 layer leaving to dry before each sanding operation.
After use, turn upside down the can and clean the valve.

DATA SHEET

SURFACE PREPARATION

To apply on light colored surfaces (primer, putty and filler), it allows the detection of superficial defects (pores, orange peel) and facilitates the preparation in the sanding process to obtain a good finish. Suitable for dry and wet sanding processes.

FEATURES OF DRY FILM

ColourBlack
Gloss 60° - 60°Matt

STORAGE

Keep in a tightly covered container, in a dry and ventilated place, avoiding direct exposure to sunlight. Temperature above 5 °C is recommended, between 15 and 30 °C optimal.
CAUTION: Under no circumstances should the packaging exceed 50 °C.
Can life: 2 years from manufacturing in date its original unopened container. Consult our Technical Department once date has expired.

RELATED PRODUCTS

Products that may interest you

Enter your data

Select the language of the sheet to download