F-286/2 2K Epoxy Shop-Primer

f detail 286 2
General Information
Compatibility and surface Application
Steel Airbrush
Stainless steel Airmix
Aluminum Airless
Galvanized
Iron
Quality Gloss
2K Matt
Can size

PRODUCT DESCRIPTION

"USE ONLY IN INDUSTRIAL FACILITIES"
This SHOP-PRIMER dries very quickly, and presents anti-corrosive and adhesion qualities on steel, aluminium, stainless steel and zinc coatings. Workshop primer or adhesion promoter in epoxy and polyurethane processes.

Because of its quick-drying and repainting qualities and the possibility to cover with BESA polyester putty range or BESA-ROC, is a must for repainting car bodies (zinc-coated platework) and for those jobs that need to be done rapidly.

Resistances are obtained on Niebla Salina until 350 h. when is recovered by finishing PUR.

APPLICATION

  • industry regleta
  • industry volumen mezcla E-91 2:1 vol.
  • pot industry life 24 h.
  • industry aplicacion copa ford 15-18"
  • succion industry pistola URKISOL 357 0-2% Ø 1.4-1.6 mm
  • pistola numero succion manos industry 20-25 my
  • secado industry tiempo 15' Tack free
  • disolventes evaporacion industry 10'

DATA SHEET

PHYSICAL PROPERTIES

Density at 20°C (g/cc)1,23 ± 0,05
Grinding Fineness (μ)20 - 25
Supply viscosity at 20°C33" ± 3 Ford n.° 4
% Solids content (weigth / volume)41 % ± 2 weight; 21 % ± 2 volume. (Mixture with hardener)
VOC (g/l)655 (Mixture with hardener)
Type of productModified Epoxy
ColorGrey 7035

SURFACE PREPARATION

Sand-blasting degree Sa 2,5 is recommended. If it is not possible, deoxidize and degresase manually.
Do not use in temperatures below 10 °C and relative humidity above 75 %.
It may be repainted after 30 min. with BESA Polyester putty range or BESA-ROC, BESA-CAR (Car Refinish) with Top-Coats such as URKI-POX, URKI-NATO, BESA-GLASS, etc. Leave to dry for a least 1 hour before repainting to obtain a higher gloss.

FEATURES OF DRY FILM

Theoretical yield (m2/l)8 - 9 (25 µm)
Gloss 60° - 60°Matt 3 - 5%
Second layer30' minimu. Recommended: 2 h.

STORAGE

Keep under cover in a cool and well-ventilated place avoiding direct sunlight. Temperatures between 5 and 30 °C recommended.
Can life: 2 years from manufacturing in date its original unopened container. Consult our Technical Department once date has expired.

COVERAGE CALCULATOR

How much do you need?

Find out by using our Coverage Calculator

i
Amount of product requiredKgi
General Information
Compatibility and surface Application
Steel Airbrush
Stainless steel Airmix
Aluminum Airless
Galvanized
Iron
Quality Gloss
2K Matt
Can size

Enter your data

Select the language of the sheet to download