"USE ONLY IN INDUSTRIAL FACILITIES"
This SHOP-PRIMER dries very quickly, and presents anti-corrosive and adhesion qualities on steel, aluminium, stainless steel and zinc coatings. Workshop primer or adhesion promoter in epoxy and polyurethane processes.
Because of its quick-drying and repainting qualities and the possibility to cover with BESA polyester putty range or BESA-ROC, is a must for repainting car bodies (zinc-coated platework) and for those jobs that need to be done rapidly.
Resistances are obtained on Niebla Salina until 350 h. when is recovered by finishing PUR.
|Density at 20°C (g/cc)||1,23 ± 0,05|
|Grinding Fineness (μ)||20 - 25|
|Supply viscosity at 20°C||33" ± 3 Ford n.° 4|
|% Solids content (weigth / volume)||41 % ± 2 weight; 21 % ± 2 volume. (Mixture with hardener)|
|VOC (g/l)||655 (Mixture with hardener)|
|Type of product||Modified Epoxy|
Sand-blasting degree Sa 2,5 is recommended. If it is not possible, deoxidize and degresase manually.
Do not use in temperatures below 10 °C and relative humidity above 75 %.
It may be repainted after 30 min. with BESA Polyester putty range or BESA-ROC, BESA-CAR (Car Refinish) with Top-Coats such as URKI-POX, URKI-NATO, BESA-GLASS, etc. Leave to dry for a least 1 hour before repainting to obtain a higher gloss.
|Theoretical yield (m2/l)||8 - 9 (25 µm)|
|Gloss 60° - 60°||Matt 3 - 5%|
|Second layer||30' minimu. Recommended: 2 h.|
Keep under cover in a cool and well-ventilated place avoiding direct sunlight. Temperatures between 5 and 30 °C recommended.
Can life: 2 years from manufacturing in date its original unopened container. Consult our Technical Department once date has expired.