High Solid Enamel.
Indicated for the painting of machinery and industrial vehicle with Air-mix or Air-less Equipment.
Elasticity, body, gloss and outdoor resistance.
The process F-296/2 + ALFA-PUR 3790 on shotblasted Steel meets the requirements for category C3 HIGH in accordance to ISO 12944-2 certified by an approved independant Laboratory.
Leave the paint settle 15´ before painting.
|Density at 20°C (g/cc)||1,16 - 1,43|
|Grinding Fineness (μ)||5 - 10|
|Supply viscosity at 20°C||55-85" Ford n° 4|
|% Solids content (weigth / volume)||60-67% weight; 47-50% volume. (Mixture with hardener)|
|VOC (g/l)||417 (Ready to use) - (2004/42/CE) IIB (D) (420)|
|Type of product||Polyester - Polyurethane|
-Steel: The surfaces to be painted, thoroughly degreased must be primed with F-296/2 or F-294/2 2K Zinc Phosphate Epoxy Primers.
For a higher rust protection, Sa 2,5 shotblasting required.
-Galvanized: Degrease. If it is old, brush and degrease. Prime with F-296/2 or F-294/2.
|Theoretical yield (m²/l)||9 - 10 (50 µm)|
|Gloss 60° - 60°||90 - 100 %|
|Second layer||3 h. after spray-booth drying|
Keep under cover in a cool and well-ventilated place avoiding direct sunlight. Temperatures between 5 and 30 °C recommended.
Can life: 2 years from manufacturing in date its original unopened container. Consult our Technical Department once date has expired.