"USE ONLY IN INDUSTRIAL FACILITIES"
Nitro-synthetic Filler used in Machine Tool Processes in order to avoid sinkages, pores or to cover up sand marks before finishing off with Enamels. As a Primer, it may be applied diirectly on cast iron or sanded platework.
Good hiding power, levelling and quick drying, is easy to sand, and can easily be repainted, enabling very short work times.
|URKISOL 300 20-25%|
|Number of coats|
|Drying Time 20°C||Touch free 10' Tack free 30'|
|Sanding||1,5 h P-320|
For steel: Degrease and remove any rust, on 2 K Polyester Putty, directly apply after sanding.
It may be repainted with URKI-LAC, URKI-RAPID, URKI-FLEX.
|Density at 20 °C (g/cc)||1,30 ± 0,05|
|Grinding Fineness (μ)||25 - 35|
|Supply viscosity at 20 °C||120 - 150 sec. Ford n.º 4|
|%Solids content (weigth / volume)||53 % ± 2 weight; 33% ± 2 volume.|
|Type of produtc||Nitrosynthetic|
|Colour||Greenish grey 1161|
|Theoretical yield (m²/l)||11 - 13 (25 my)|
|Gloss 60° - 60°||Matt|
|Second layer||1 - 2 h.|
Keep under cover in a cool and well-ventilated place avoiding direct sunlight. Temperatures between 5 and 30 °C recommended.
Can life: 2 years from manufacturing in date its original unopened container. Consult our Technical Department once date has expired.