Nitrosynthetic enamel for industrial use and car repair, as a metallic enamel in a single coat with a satin and soft appearance.
It stands out for its extensibility, shade robustness, quick drying, handling and hardening.
|1,3 – 1,5 mm|
|Number of coats|
It is convenient to let the diluted mixture stabilise for 15 minutes, before starting the application.
To make it an anti-graffiti paint, replace the indicated thinner with anti-graffiti additive 51. Chek the technical data sheet of the additive.
When a quicker drying time is needed for masking, E-750 accelerator (see TDS) or E-203 hardener can be used on small surfaces.
In both cases the potlife will be shortened.
It can be recoated 3 hours after drying in booth. If the product is used as anti-graffiti, it needs to be sanded and degreased.
The use of appropriate personal protective equipment is recommended during application, to prevent the irritation of the respiratory tract, skin and eyes. For professional use only.
Keep in a tightly covered container, in a dry and ventilated place, avoiding direct exposure to sunlight. Temperature above 5°C is recommended, between 15 and 30°C optimal.
The VOC content of URKILAC is a maximum of 840 g/l in compliance with European regulation 2004/42/EC IIB(E) (840) <840 g/l.
The information contained in this Technical Specification Sheet is based on the knowledge and experience of the BESA technical department, and with it it’s intended to advice and inform, being the responsibility of the user to take the necessary measures to guarantee the intended purpose of the product. FOR PROFESSIONAL USE ONLY.