POSTS
URKI-ETCH 1K Etch Primer
Colors
General Information
| Adherence | |
|---|---|
| Steel | |
| Aluminum | |
| Electro-zinc | |
| Galvanized | |
| PC | |
| ABS | |
| Carbon fiber |
Can size
- 400 ml 12 Pcs x box
DESCRIPTION
Universal 1k primer with adhesion on steel, galvanized steel, electro-zinc and aluminum. Its fast drying, excellent adhesion and recoatability focus this primer on touching up in the Boiler manufacturing, Industrial Vehicle, Agricultural Machinery, Metallic Structure, etc.
It offers good adhesion on plastic supports such as PA6, PVC, MA, PC and ABS, Epoxy, Polyester and Carbon Fiber.
APPLICATION
Painting range 20-30 cm 
10-15my 
5-10 min. 
Dry 20 min.
Shake the can during 2-3 minutes before using Spray F-29.
Apply in 2-3 layers, leaving 5-10 min. in between layers.
Having used the spray, turn it upside down and press in order to clear the nozzle.
DATA SHEET
SURFACE PREPARATION
Shake the can during 2-3 minutes before use the SPRAY URKI-ETCH.
Apply 1 coat and let it dry before each sanding operation.
After use, turn upside down the can and clean the valve
FEATURES OF DRY FILM
| Colour | Grey 7040 |
| Gloss 60° - 60° | Matt <5% |
| Second layer | 2 h. |
STORAGE
Keep in a tightly covered container, in a dry and ventilated place, avoiding direct exposure to sunlight. Temperature above 5 °C is recommended, between 15 and 30 °C optimal.
CAUTION: Under no circumstances should the packaging exceed 50 °C.
Can life: 2 years from manufacturing in date its original unopened container. Consult our Technical Department once date has expired.
Colors
General Information
| Adherence | |
|---|---|
| Steel | |
| Aluminum | |
| Electro-zinc | |
| Galvanized | |
| PC | |
| ABS | |
| Carbon fiber |
Can size
- 400 ml 12 Pcs x box
RELATED PRODUCTS
Products that may interest you
