POSTS
URKIKOMBI 1K NC Sealer
DESCRIPTION
Designed for Spot Repair to collect minor imperfections such as scratches, blisters, pinholes, impacts, etc. Very effective in filling in small pinholes in spoilers and Fiberglass parts.
Easy application, fast drying, and soft, silky and very flexible surface. Lack of shrinkage in repaired areas,
It can be applied on polyester putties or acrylic type primers and fillers. Also on steel, aluminum and zinc covered surfaces.
APPLICATION PROCESS
APPLICATION
 | Thickness | Maximum 80µ in thin layers |
 | Drying time 20°C | 30-45' |
 | Sanding 20°C | P240 P400 |
Application: spatula. Application in thin layers. Time between layers 20-30'. Not recommended to exceed 70-80µ total.
SURFACE PREPARATION
La superficie a reparar debe ser desengrasada y con lijado previo de la misma, tanto sobre soportes metálicos como sobre masillas o aparejos.
RELATED INFORMATION
SAFETY INSTRUCTIONS
The use of appropriate personal protective equipment is recommended during application, to prevent the irritation of the respiratory tract, skin and eyes. For professional use only.
STORAGE
Keep in a tightly covered container, in a dry and ventilated place, avoiding direct exposure to sunlight. Temperature above 5°C is recommended, between 15 and 30°C optimal.
VOC
The VOC content of URKIKOMBI is a maximum of 540 g/l.
PRODUCT NOTE
The information contained in this Technical Specification Sheet is based on the knowledge and experience of the BESA technical department, and with it it’s intended to advice and inform, being the responsibility of the user to take the necessary measures to guarantee the intended purpose of the product.
FOR PROFESSIONAL USE ONLY.
RELATED PRODUCTS
Products that may interest you
