2K Polyester Aluminium Low Density Putty | BESA-SILVER

90131 Aluminium

Hardeners	Adherence
BPO	Steel
	Aluminum
	Electro-zinc

1L 8 Pcs x box

Low density polyester filler based on aluminum metallic pigment, designed for use in body shops for filling imperfections or dents, perforations, cracks or chipping.

It stands out for its high thixotropy, which allows great filling power, and its easy sanding. Adhesion on sheet steel, aluminum, electro-galvanized and galvanized steel.

The use of an electronic scale is recommended. Mix homogeneously to avoid the formation of air bubbles.

Hardener	Percentage	Temperature
BPO	3%	5-10°C
BPO	2%	10-20°C
BPO	1%	>20°C

Note: Adding more hardener is not recommended in order to prevent bleedings in the paint.

APPLICATION

		BPO
	Mixing ratio Weight	100:1-3 P
	Pot-life	4-5’
	Spatula Number of coats Total thickness	Avoid air bubble formation during its application. Vary depending on the depth of the repair. 1000-3000 μm
	Drying Time 20°C IR Medium wave	30’ 5’
	Sanding	P80-P120 P120-P240

Application: By spatula.
The hardener mixture can be carried out on the same spatula, homogenizing it well before applying.

When a deep filling is required, apply several layers, letting them dry at each time during the process. Sanding at each stage is recommended in order to obtain better adhesion between the coats.

USE

Application: By spatula.
The hardener mixture can be carried out on the same spatula, homogenizing it well before applying.

When a deep filling is required, apply several layers, letting them dry at each time during the process. Sanding at each stage is recommended in order to obtain better adhesion between the coats.

MIXING RATIOS

Recommended mixes	100 g	250 g
BPO mix 3%	3	7,5
BPO mix 2%	2	5
BPO mix 1%	1	2,5

SEGURIDAD E HIGIENE

Se recomienda utilizar equipo de protección personal apropiado durante la aplicación, para evitar la irritación de las vías respiratorias, piel e irritación ocular. Sólo para uso profesional.

ALMACENAMIENTO

Manténgase bajo cubierto en lugar seco y ventilado, evitando la exposición directa de la luz solar. Se aconseja temperatura superior a 5 °C, recomendable entre 15-30 °C.

VOC

El contenido de VOC de BESASILVER es cómo máximo de 250 g/l. cumpliendo con la normativa europea 2004/42/CE IIB(B) (250) <250 g/l.

NOTA DE PRODUCTO

La información contenida en esta Ficha Técnica está basada en los conocimientos y experiencia del departamento técnico de BESA y con ello se trata de asesorar e informar, siendo responsabilidad del usuario tomar las medidas necesarias para garantizar la finalidad prevista del producto.
USO EXCLUSIVAMENTE PROFESIONAL.